New – professional Fog and Flue Gas Simulator FS200

tro_blog_banner_fs200_enThe device u see right handed is a simple disco nebulizer. It works simply via gas pressure, which results by evaporation expansion of the fluid in the heating chamber. If the gas pressure gets too high, a valve opens and the fog is released. The Trotec device at the left hand of the picture amounts almost the hundred fold! Many times our sales staff hears the same question: what justifies the enormous difference in prices?

Read More

The UV-TrackMaster – non destructive tracer detection

tro_blog_banner_uv-trackmaster_en

New in our Trotec product range is the compact long wave UV lamp UV-TrackMaster. It is suitable for on destructive tracer detection at material testing, leakage location or quality controlling for security applications. Leakage searching at engines or aggregates, in buildings and wiring systems and the material testing for industry happens quickly and fast with the practical spotlight.

With its economical designed pistol grip for extensive illumination designed, the UV-TrackMaster is ready for action right away. The high radiation strength makes the smallest tracer paths visible, even at daylight and long distance. That’s why with this device you don’t have to neither shorten the distance, nor darken the light. You can switch it on and off easily by pushing a button on the pistol grip. In poorly lit areas you can switch on the separately connectible LED high performance orientation light for help. For only 1,184.05 Euros the UV-TrackMaster will shortly be yours! Read More

Accurate leak detection with the new impulse current measuring system PD200

VIEW_tro_blog_banner_pd200-neu_en

Do you want to locate cracks or holes on flat roofs, find leaks in non-conductive sealing systems: for example bitumen, elastomer, PE-HD or other synthetic liners quickly and easily? Then you need the new impulse current measuring system PD200. With this quality measuring device “Made in Germany” leaks on flat roofs are things of the past.

The new impulse current measuring system PD200 from Trotec is perfectly suitable for the precise detection of cracks or holes on flat roofs. Technically further developed compared with the previous model size (30 % less case volume) and weight (20 % lighter) could be reduced noticeably. Nevertheless, the PD200 measuring system still has the same, complete accessories. The device can be transported through narrow passages like safety ladders much easier. In the new yellow and black Trotec design the PD200 has been designed more appropriate. Du to the leightweight construction based on aluminium it, additionally, is more robust. Read More

Trotec presents new leak detection program at IFAT 2010

TROTEC at the IFAT 2010 trade fair

September proved to be yet another busy month for TROTEC. This time we were at the IFAT ENTSORGA 2010 in Munich, which is highly regarded as being the leading international trade fair for environmental technology.

The fair, with its focus set firmly on water, waste water and waste and raw material management, attracted approximately 110,000 visitors from a total of over 185 different countries. During the 5-day event, which lasted from 13 – 17 September, 2,730 exhibitors from 49 countries rose to the opportunity to showcase their most prized products and the latest in cutting-edge technology in their own individual fields. One of the many innovative initiatives which caused quite a stir at this much-acclaimed venue was the state-of-the-art measuring technology program for leak detection in drinking water systems which we at TROTEC took great pride in presenting exclusively. The LD-series is based on the principle of combined detection, using acoustic and pressure sensors to systematically locate possible leaks. The program is made up of the following individual components:

  • The LD5L wireless data logger, which is positioned in the respective pipe system in order to constantly measure the sound level before transmitting the data it has collected to a passing measuring vehicle.
  • The LD5DL pressure data logger, which monitors the pressure status in water supplies both quickly and reliably. The high sampling rate of up to ten measurements per second enables the logger to record even the smallest of pressure surges before storing the data for later assessment and analysis using the software included in the scope of delivery.
  • The LD20PC multifunctional correlator, which is designed to pinpoint any possible leaks in pressure lines. The device registers the impact sound at different points in the pipe network and is then able to detect the exact position of the leak by comparing the length of time which has elapsed between echoes.
  • The LD 6000 combi detector, which is designed expressly for mobile leak detection and the acoustic location of water pipes. The device, which is the first of its kind worldwide, is excellently suited for versatile use as a means for mapping out routes, narrowing down the possible position of a leak or for pinpointing leaks accurately and reliably. When used in combination with the LD 6000 H2 hydrogen sensor, the combi detector can also be employed to detect leaks using trace gas. The optionally available LD-PULS pulse wave generator, which can be used to detect the position of non-metallic pressure water pipes, rounds off this package admirably.

This means that TROTEC now offers a complete and comprehensive program designed to assess the condition of drinking water systems for water suppliers and metrological service providers alike.

The reaction among experts and professionals can only be termed as extremely positive. The specialists responsible for pipework infrastructure in town councils , local authorities and large industrial areas showed great interest in this new product series which has been designed specially with the intention of making their job easier and even more efficient.

If you want to find out more about the measuring devices in the LD-series visit our product catalog!