Now that everyone is more or less under house arrest, you probably want to at least use be able your pool or natural pond whenever you like. Therefore, especially in times like these, you should use the compact BW10 measuring device to regularly check the pH values in the water basin. This means you can easily check whether the water is too acidic or too alkaline. This applies all the more to pools, with these having to be continuously supplied with disinfectant such as chlorine or bromine.
In order to prevent allergic reactions for yourself and your loved ones after bathing in the pool, especially in outdoor pools, you should check whether the water is at the correct pH value using the BW10 measuring device. This also applies to natural ponds, which usually have a natural equilibrium and do not need additional chemical additives. Rain and top-ups with tap water can cause the pH value to constantly shift into the acidic (pH < 7) or alkaline (pH > 7) range.
Ideally, pond and pool water should have a pH value of approx pH 7 (neutral) and this should remain as steady as possible over time. Because if the water in pools becomes too acidic or alkaline, it can affect the people bathing in it by, for example, causing eye irritations and itchy skin. Furthermore, the durability of the materials used in the pool is affected, since this causes the materials to corrode, decompose and become more porous, while the effectiveness of the added disinfectants is also impacted.
BW10 pH measuring device – simple and precise measurement of pH values
The BW10 pH meter allows the accurately, quick and precise determination of pH values between pH 0 and pH 14, thanks to automatic temperature compensation and the use of auto calibration in the temperature measuring range from 0 to 50 °C. The determined pH value is displayed accurately to two decimal places along with the water temperature. A separate thermometer is therefore not necessary. The test result is indicated on the clearly legible two-line display. The device has a 3-point calibration that is already carried out before leaving the factory, with it also being possible to repeat this at any time later on with very little effort by using the supplied pH buffer solution set.
The practice-optimized BW10 pH meter comes equipped with an easily exchangeable pH electrode. The electrode and water temperature probe are protected from damage by means of a removable protective cap. Due to a convenient hold function, it is not necessary to write down the previously measured value. Furthermore, an automatic switch-off function reduces the energy consumption of the four button batteries already included in the scope of delivery.
BW10 pH meter – brand quality Trotec
Benefit from Trotec brand quality as a guarantee of high value, safety and functionality. Order the BW10 pH meter today at our current offer price, reduced from € 83.02 to just € 55.33 including VAT – in the Trotec shop now!
