NEW Clear water immersion pump TWP 7505 E and TWP 9005 E: for wipe-dry results – available again!

No matter how high the water rises after a leak in the basement or kitchen, the shallow-suctioning immersion pumps TWP 7505 E and TWP 9005 E only leave a few drops behind. The perfect solution for drying flooded flat areas in basements or swimming pools – to ensure the ground ends up “wipe-dry”. Of course, the clear water pump is also an ideal choice for expert and hobby gardeners who wish to pump out or transfer irrigation water from wells, rain barrels and tanks.

The 750 Watt pump with a capacity of 13,000 litres per hour, and the 900 Watt pump with 14,000 litres per hour, pumps out flooded basements and laundries, empties entire swimming pools quickly and ensures rapid transfer from full cisterns and rain barrels down to a residual water level of 3 mm in next to no time. In doing so, it conveys lightly contaminated water with particles up to 5 millimetres in size at an extraction height of up to 10 or 11.5 metres.

How it works

Both pumps are really easy to operate via an infinitely locking floating switch: You only need to set the desired water level – the automatic on/off function does the rest. Plus the level control for the water level can be set via the floating switching in the room to be pumped out or pumped dry. The dry-run protection ensures greater flexibility in automatic operation. Manual operation is of course possible if the water level is low.

The watertight and impact-resistant plastic housing of the electrical pump is suitable for underwater use down to 7 metres depth. You only need a water level of 80 mm to start the pump impeller. For long-term application, the clear water immersion pump has an integrated thermal protection switch in case of overheating, while a high-quality mechanical seal made from ceramic plus a low-wear shaft ensure durability.

The convenient handle makes it easier to carry the compact unit around the garden or anywhere else. This also serves for mounting the pump on the nylon rope, so as to lower it conveniently into a pool for instance. The immersion pump has universal connections on the angle adapter for 25 mm and 32 mm inner diameter as well as 1”, 1¼” and 1½”.

Four of many advantages I particularly like:

  • Powerful 750 Watt output for pumping up to 13,000 litres per hour, powerful 900 Watt output for up to 14,000 litres per hour
  • Maximum extraction height up to 10 or 11.5 metres
  • Ideally suitable for draining, transferring and pumping out areas of water like swimming pools, rain barrels or basements after leaks or flooding
  • Easy pumping of clear water with up to 5 mm large suspended particles

Clear water immersion pump TWP 7505 E – TÜV-tested brand quality

The TWP 7505 E from Trotec is supplied as a complete set to guarantee high quality, safety and functionality in TÜV-tested quality – including reducing adapter with pre-installed backflow stop and sealing ring, angle adapter, 12 m long nylon cord and 10 m long power cord.

Order the new waste water immersion pump TWP 7505 E today at our current offer price, reduced from £71.26 to just £37.98 , including VAT and the TWP 9005 E for £42.73 instead of £76.01 , including VAT – now in the Trotec Shop!

Leave a Reply

Your email address will not be published.

By submitting, you agree to the processing of your personal data in accordance with our privacy policy.


*