{"id":11880,"date":"2021-02-10T09:21:32","date_gmt":"2021-02-10T08:21:32","guid":{"rendered":"https:\/\/www.trotec-blog.com\/en\/?p=11880"},"modified":"2021-02-10T09:21:32","modified_gmt":"2021-02-10T08:21:32","slug":"new-tdp-dsa-electronic-pressure-switch-convenient-pump-control-for-home-and-garden-with-integrated-switch-and-dry-run-protection","status":"publish","type":"post","link":"https:\/\/www.trotec-blog.com\/en\/trotec\/new-tdp-dsa-electronic-pressure-switch-convenient-pump-control-for-home-and-garden-with-integrated-switch-and-dry-run-protection\/","title":{"rendered":"NEW TDP DSA electronic pressure switch: convenient pump control for home and garden \u2013 with integrated switch and dry-run protection"},"content":{"rendered":"

\"\"If you want to take your garden irrigation or house water supply via garden or deep well pump into your own hands, you should take a look at the new TDP\u00a0DSA pressure switch from Trotec. The compact pressure switch is simply installed between the pump and the water tap or garden hose and the water supply runs automatically without having to switch the pump on and off manually. In the future, you will only need to turn the water tap or garden hose on and off, saving you the walk, which can sometimes be long, to turn the pump on and off.<\/h2>\n

<\/p>\n

The TDP\u00a0DSA pressure switch<\/strong><\/a> from Trotec is suitable for almost all common pump systems that are not equipped with their own pressure switch but have their own mains plug. The TDP\u00a0DSA electronic pressure switch<\/strong><\/a> is connected simply, practically and reliably via plug & play in two steps:<\/p>\n

    \n
  1. You connect the mains plug of your pump to the 230\u00a0V mains socket integrated in the pressure switch.<\/li>\n
  2. And you connect the mains plug of the pressure switch to your house socket. Done!<\/li>\n<\/ol>\n

    Now the\u00a0water pump\u00a0is automatically supplied with power and regulated maintenance-free every time you open and close the consumer. This is because the pressure switch ensures constant water pressure in the connected pipe system for garden irrigation or domestic water supply and also protects the connected pump from damage due to dry-running, knockback effects and overheating.<\/p>\n

    Here\u2019s how it works<\/h3>\n

    The TDP\u00a0DSA pressure switch<\/strong><\/a> controls automatic domestic water supply and service water use in the home and garden and is the reliable solution for the automatic control of deep well pumps, garden pumps, centrifugal pumps or water pumps. This is because the pressure switch permanently monitors the line pressure and automatically switches on and restores the pressure in the event of a pressure drop. If the line pressure is reached again, the pump control switches itself off automatically.<\/p>\n

    The pressure switch is designed for a working pressure in the conveyor system of up to 10\u00a0bar, which can be read on the integrated pressure gauge. The robust plastic housing is protected against water jets and dust from all sides in accordance with protection class IP65. The pumps connected to the pressure switch are protected against damage caused by dry-running, kickback effects and overheating, thus extending their effective service life. Incidentally, the two inlet and outlet openings on the pressure switch are equipped with 1″ external threads and thus fit perfectly to common pump, hose or pipe connections.<\/p>\n

    The TDP\u00a0DSA pressure switch – universally applicable<\/h3>\n

    The TDP\u00a0DSA pressure switch can be used for a wide range of commercially available water pumps and delivery systems \u2013 either by hose connection or directly on the pump head. The device can also be used to control the following pumps from our range:<\/p>\n