Phone: +49 2452 962 0 Mon - Thu: 8:00am – 5:30pm
Friday: 8:00am - 5:00pm (CET)

Regardless of whether a jigsaw is used primarily for wood or metalworking, the saw blade has to be replaced once in a while. It’s good if the old one has done its job cleanly until then. It’s even better if the new saw blade is superior to its predecessor with respect to material properties, cutting guidance and price-to-performance ratio. We always say: “Better is the enemy of good.” With this in mind, we recommend our new jigsaw blade sets with the Trotec brand quality.

You can use the high-quality saw blades from Trotec with any jigsaw equipped with a single-tappet shaft mount (T shaft). This pertains to both the pendulum stroke jigsaw blades from Trotec and the majority of all available pendulum stroke jigsaws.

The milled saw blades are made entirely of carbon steel, which is particularly suitable for sawing soft materials such as wood, wood fibre boards or plastic. The set includes multiples of three different types of saw blades, so you have the optimal wood saw blade available for any task.

Saw blades included in this set:

    • 4 saw blades with milled and straight-set teeth, blade length 100 mm, blade thickness 1.2 mm. Uniform tooth distribution of 3.2 mm (tooth concentration 8 TPI).

Optimally suited for straight, fast rough cuts in soft wood 4 to 50 mm thick.

    • 4 saw blades with milled and corrugated teeth, blade length 92 mm, blade thickness 1 mm. Uniform tooth distribution of 2.1 mm (tooth concentration 12 TPI).

Optimally suited for straight, fine cuts in soft wood 2 to 15 mm thick.

    • 2 saw blades with milled and corrugated teeth, blade length 75 mm, blade thickness 1 mm. Uniform tooth distribution of 2.1 mm (tooth concentration 12 TPI).

Optimally suited for fine curved cuts in soft wood 2 to 15 mm thick.

The milled saw blades are 92 mm long and made entirely of fully annealed super-speed steel, with which you can saw through harder materials quickly and precisely.

This set includes multiples of four different types of saw blades – this way you always have the optimal metal saw blade available for medium to very thin sheets or for curved cuts. Eight saw blades with progressive tooth distribution are also provided, which ensures fast sawing progress and low-vibration sawing.

Saw blades included in this set:

    • 3 saw blades with milled and corrugated teeth, blade length 92 mm, blade thickness 1 mm. Uniform tooth distribution of 1.8 to 2.5 mm (tooth concentration 10/14 TPI).

Optimally suited for straight, fine cuts in medium sheets 2.5 to 6 mm thick.

    • 3 saw blades with milled and corrugated teeth, blade length 92 mm, blade thickness 1 mm. Uniform tooth distribution of 1 to 1.5 mm (tooth concentration 17/24 TPI).

Optimally suited for straight, fine cuts in thin sheets 1 to 3 mm thick.

    • 2 saw blades with milled and corrugated teeth, blade length 92 mm, blade thickness 1 mm. Uniform tooth distribution of 0.8 mm (tooth concentration 32 TPI).

Optimally suited for straight, fine cuts in very thin sheets 0.5 to 1.5 mm thick.

    • 2 saw blades with milled and corrugated teeth, blade length 92 mm, blade thickness 1 mm. Uniform tooth distribution of 1 to 1.5 mm (tooth concentration 17/24 TPI).

Optimally suited for straight, fine cuts in thin sheets 1 to 3 mm thick.

Jigsaw blade sets for wood and metal– at an unbeatable price!

Take advantage of our current promotional price today and order the:

incl. VAT – now in the Trotec shop!

This entry was posted in TROTEC, Up To Date and tagged , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *


*

  • Discover more …

  • Archives

Top Keywords for http://www.trotec-blog.com/en/trotec/new-jigsaw-blade-sets-for-wood-and-metal-finally-available/